OutBack
-
Outback 30 Amp 120/240 VAC double pole panel mount breaker for AC Coupling in the GSLC. (SKU Part Number PNL-30D-AC-120/240)
30 A 120/240VAC double pole panel mount breaker with 1/4" stud terminals. Used to connect AC Coupled grid-tie inverter inside of GS load center. Features Front panel mount, single and double pole with stud terminals on the back Conductor ring terminals required Used for...- $54.00
- $54.00
- (-0%)
- Unit price
- per
-
Outback 40 Amp, 300Vdc, 1/4” stud terminals (SKU Part Number PNL-40-300VDC)
Features Front panel mount, single and double pole with stud terminals on the back Conductor ring terminals required Used for DC sources, inverters and load circuits Panel mounted hydraulic-magnetic type breakers Rated for 100% continuous duty cycle Not affected by high ambient temperatures Non-polarized...- $63.00
- $63.00
- (-0%)
- Unit price
- per
-
Outback 4kVA 120/240Vac 60Hz with 20 Amp autotransformer dual pole breaker for mounting inside of FW500 or FW1000 AC enclosures. (SKU Part Number FW-X240)
The OutBack FW-X240 (6 kVA) autotransformer can be used for 120 to 240 Vac step-up or 240 to 120 Vac step-down applications, generator balancing, general split-phase output balancing, or balancing the outputs of series-stacked inverters. Use for 120/240 Vac, 60 Hz systems only. Features...- $549.99
- $549.99
- (-0%)
- Unit price
- per
-
Outback 500 Amp 50mV DC current shunt with attached terminal bus bar and one white insulator (SKU Part Number FW-SHUNT500)
500 A 50mV DC current shunt with terminal bus bar and white insulator. Features Provide valuable insight into the status of batteries or DC power source One shunt kit is included standard on FLEXware 500 and FLEXware 1000 DC enclosures Specifications Current Rating: 500...- $68.00
- $68.00
- (-0%)
- Unit price
- per
-
Outback 50A 250VAC single pole panel mount breaker with 1/4" stud terminals (SKU Part Number PNL-50-AC-250)
50 A 250 Volt AC single pole panel mount circuit breaker. 1/4" stud terminals. Used in Outback GS load centers. Features Front panel mount, single and double pole with stud terminals on the back Conductor ring terminals required Used for DC sources, inverters and...- $19.18
- $19.18
- (-0%)
- Unit price
- per
-
Outback Battery Spill Containment Tray (SKU Part Number PSR-SCT)
Holds four Group 31, T105 or L16 batteries. The tray has enough capacity to hold one ruptured battery cell's spilled electrolyte. Fits on one PSR shelf. Molded acid resistant polyethylene plastic. Features Easy installation and high compatibility Specifications Material: Polyethylene Plastic- $39.00
- $39.00
- (-0%)
- Unit price
- per
-
Outback Bus Bar with Brown Insulators & Mounting Screws (SKU Part Number TBB-BROWN)
Brown terminal bus bar with mounting screw (no insulators). (Live in 230V EU systems) Three #1/0 to 14 AWG and eight #6 to 14 AWG screw type compression terminals (no ring lugs required). Mounting screws included. Rated at 180 A. Features Used for adding...- $21.99
- $21.99
- (-0%)
- Unit price
- per
-
Outback Charge Controller Mounting Bracket (SKU Part Number FW-CCB2)
Bracket for mounting a single FM Charge Controller. Includes bracket, bushings and mounting hardware FM-60 or FM-80 Charge Controller Mounting Brackets FW-CCB and FW-CCB2 mounting brackets allow OutBack Power Systems charge controllers to be mounted on the side of FW500-DC or FW1000-DC enclosures. FW-CCB2-T...- $95.00
- $95.00
- (-0%)
- Unit price
- per
-
OutBack Communications Hub10.3
The HUB system communications manager is the backbone of your networked OutBack power conversion system. The OutBack HUB communicates stacking, load share and power save on/off signals. Interconnection cabling is standard Ethernet CAT5 with RJ45 modular jacks. Through the use of a HUB, your...- $399.99
- $399.99
- (-0%)
- Unit price
- per
-
Outback CSIP Bridge
The CSIP Bridge by Outback Power™ provides a quick and simplified way to remain compliant with SunSpec IEEE 2030.5 regulations on existing Radian and FXR inverters. The CSIP (Common Smart Inverter Profile) Bridge works seamlessly with the MATE3s system display and controller for both...- $469.84
- $469.84
- (-0%)
- Unit price
- per
-
Outback DC Conduit Adapter (SKU Part Number FW-DCA)
The FLEXware DC Adapter or FW-DCA is a plastic case that fits on the DC end of an FX Series Inverter/Charger to extend the size of the DC wiring compartment in OutBack FLEXware systems. The FW-DCA aligns with knockouts on both the FW500-DC and...- $55.99
- $55.99
- (-0%)
- Unit price
- per
-
Outback DC Shunt Bus for GS Load Center (SKU Part Number GS-SBUS)
This is a shunt bus to connect three shunts within the GS Load Center. It is needed when adding the optional FLEXnet DC and it's additional shunts.. Features Easy installation Specifications Rated Current Rating: 180 A Suitable For Use With: GS Load Center Standards:...- $32.00
- $32.00
- (-0%)
- Unit price
- per
-
Outback FLEXnet DC monitors up to 3 Shunts for improved battery management (SKU Part Number FN-DC)
OutBack Power's FLEXnet DC is the ultimate DC system monitoring device. Our integrated networked communications make valuable, usable data available from your system and viewable on an OutBack MATE communications device, providing you with the critical answers about your system's health, performance and efficiency....- $399.00
- $399.00
- (-0%)
- Unit price
- per
-
Outback FLEXpower 8kW 48V Pre-wired Radian System 120/240V (SKU Part Number FPR-8048A-01)
With the Renogy 320W Solar Panel Pack, you can transform your structure into an energy-producing hub with just a few easy steps. This incredible solar panel set features 8 power-packed, high-efficiency solar modules that are small and light, while delivering impressive outputs of up...- $7,799.99
- $7,799.99
- (-0%)
- Unit price
- per
-
Outback FLEXpower One 2.5kW 24V Pre-wired FXR Series System 120V (SKU Part Number FP1 FXR2524A-01)
OutBack's pre-assembled and pre-wired power systems take the concept of fast, easy installation to a new level of performance, value and flexibility with the FLEXpower. Everything you need, besides power sources and batteries, comes completely integrated-just install the mounting bracket, hang the system on...- $4,445.00
- $4,445.00
- (-0%)
- Unit price
- per
-
Outback FLEXpower One 3kW 48V Pre-wired FXR Series System 120V (SKU Part Number FP1 FXR3048A-01)
OutBack's pre-assembled and pre-wired power systems take the concept of fast, easy installation to a new level of performance, value and flexibility with the FLEXpower. Everything you need, besides power sources and batteries, comes completely integrated-just install the mounting bracket, hang the system on...- $4,299.00
- $4,299.00
- (-0%)
- Unit price
- per
-
Outback FLEXpowerONE FP1 VFX3648 3600W Pre-Wired System
The new FLEXpower ONE System accommodates all of the essential protective devices in the smallest possible space at the lowest installed cost, making it ideal for applications with modest power requirements such as cabins, chalets, homes, remote communication sites and backup power systems. Utilizing...- $3,999.00
- $3,999.00
- (-0%)
- Unit price
- per
-
OutBack FlexWare FW-CCB2 Charge Control Side Bracket
Bracket for mounting two FLEXmax Series Charge Controllers on the side of FW500, FW1000 or GSLC enclosures. Features Efficiency - Large power requirements such as large residential, commercial or village power systems Safety - Capable of supporting up to four OutBack FX Series Inverter/Chargers...- $89.70
- $89.70
- (-0%)
- Unit price
- per
-
Outback FLEXware MATE2 mounting bracket- with mounting screws and bushings (SKU Part Number FW-MB2)
Bracket for mounting a MATE2 system display on the side of FW500 and FW1000 enclosures. Specifications Includes: Mounting Screws & Bushings Application: Mounting a MATE2 System Display on the Side of FW500 and FW1000 Enclosures Documents Specification Sheet Instruction/Installation Manual- $40.91
- $40.91
- (-0%)
- Unit price
- per
-
Outback FLEXware MATE3 Mounting Bracket (SKU Part Number FW-MB3)
This kit allows the user to mount the MATE3 controller to the side of the FLEXware assembly. It's designed to fit both the FLEXware 500 AC and the FLEXware 1000 enclosures. All hardware is included for fastening the bracket to the enclosure. Features Kit...- $48.00
- $48.00
- (-0%)
- Unit price
- per
