Outback CSIP Bridge

The CSIP Bridge by Outback Power™ provides a quick and simplified way to remain compliant with SunSpec IEEE 2030.5 regulations on existing Radian and FXR inverters. The CSIP (Common Smart Inverter Profile) Bridge works seamlessly with the MATE3s system display and controller for both the Radian and FXR inverters. The device provides secure communications between a utility company and an inverter. This ensures compliance with California Rule 21, Phase 2, and key functions required in Phase 3.Our CSIP Bridge makes it easy for installation in that the device itself does not need to be located near the MATE3s; it just needs to be on the same network. An installer-supplied Ethernet cable is used to connect the CSIP Bridge on the same LAN as the MATE3s. Indoor installation only. The CSIP Bridge requires the MATE3s firmware to be updated to at least version 001.004.003. It requires a USB power supply (provided) and a USB computer connection cable (provided). Installers utilize their own computer for setup via USB connection.

Features

• Enables communication between MATE3s and the utility company
• Works with Radian or FXR Inverter installations
  

Specifications

• Dimensions: 3.75 in Length x 3 in Width x 1.25 in Height
• Operating Temperature: -40 to 60 deg C
• Environmental Rating: Indoor Type 1
• Suitable For Use With: GS8048A, GS4048A, FLEXpower Radian integrated systems (Radian A-Series Inverter/Charger), FXR2524A, FXR3048A, VFXR3524A, VFXR3648A (FXR/VFXR A-Series inverter/charger)
• Cabling: USB (Micro-B), Ethernet cable, USB (A)
• Remote Display: MATE3s
• Network Connection: Local Area Network Connection of MATE3s
• Firmware Required: MATE3s Firmware 001.004.003 or Above
• Standards: SunSpec IEEE 2030.5
• Warranty: 5 Years
  

Documents 

• Specification Sheet
• Quick Start Guide