2

These powder-coated aluminum rainproof array combiners will accept DIN-mount 150 V circuit breakers, MidNite 300 VDC breakers, Midnite 600 VDC breakers, or 600 VDC fuse holders for grid-tie arrays. A plastic cover provides a dead front for safety and can be knocked out for...

The MNLBC Battery Combiner is designed to be a safe, convenient, rainproof enclosure for connecting up to 14 battery strings. Positive and negative wires from each string enter the combiner, and a single, larger combined negative/positive string exits the combiner going to the loads....

With the UL458 marine supplement, THE KID meets very strict vibration, environment, and thermal requirements. Comes standard with marine mounting bracket. Model number MNKID-M-B for the Black marine and MNKID-M-W for the White marine version. The marine versions can be cut into the wall...

With the UL458 marine supplement, THE KID meets very strict vibration, environment, and thermal requirements. Comes standard with marine mounting bracket. Model number MNKID-M-B for the Black marine and MNKID-M-W for the White marine version. The marine versions can be cut into the wall...

A generic E-Panel to be used with inverters that don't already have their own specific E-Panel. Features Gray steel with 250A/125VDC inverter breaker 4 ft of AC wiring to go to the inverter AC Bypass installed and wired DC Shunt installed PV Positive bus...

The MNDC Plus version of the popular MNDC adds another din rail allowing up to ten din rail mount breakers. Two din rail cover plates and two panel mount plates are included. The panel mount plates allow for mounting the 3/4" 125VDC breakers that...

The Mini-DC was designed to take into account many different types of renewable energy installations. These installation instructions will describe and show some of the more common possibilities. Features Aluminum chassis. (no rust in the tropics or around salt water) Hinged door for easy...

The MNDC Plus version of the popular MNDC adds another din rail allowing up to ten din rail mount breakers. Two din rail cover plates and two panel mount plates are included. The panel mount plates allow for mounting the 3/4 in 125 VDC...

The Mini-DC was designed to take into account many different types of renewable energy installations. These installation instructions will describe and show some of the more common possibilities.   Features Aluminum chassis. (no rust in the tropics or around salt water) Hinged door for...

General use enclosure for 15 panel mount type breakers from 5 - 100 A as well as a single 125, 175 or 250 A breaker if so desired. Specifications Type: General Use Enclosure Material: Aluminum Protection: Type 1 (Indoor) Dimensions: 23 in Length x...

Specifications Includes: Midnite BRAT PWM Charge Controller Midnite BIG BABY Box (1) Midnite MNEPV10 Breaker for the Load Output (1) Midnite MNEPV20 Breaker for the PV Input (1) Midnite MNEPV30 Breaker for the Battery Output Conduit & Adapters Wire & Strain Reliefs, etc. Warranty:...

1000 A Positive or negative busbar with 3/8 inch studs. Used in the MNBCB-1000/50 and MNBCB-1000/100-Battery Combiners. Comes with red and white insulators and screws. Features For use with MNBCB 1000/50 and MNBCB 1000/100 Specifications Dimensions: 8-1/4 in Length x 5-3/8 in Width x...

The Philadelphia Solar 580W Bifacial 144-Cell Solar Panel (MNB144(HCBF)-580W) is a high-performance solar module designed to deliver superior efficiency and durability for utility-scale and commercial solar projects. Featuring cutting-edge bifacial technology and an advanced 144-cell half-cut design, this panel ensures maximum energy output, even in demanding...

The classic 200 mppt charge controller has arc fault, ground fault, free web monitoring, a graphics panel and solar, hydro and wind modes. the classic 200 has a maximum output current of 79 amps, an operating voltage of 200 volts and works with 12...

For maximum yields combined with outstanding design: Heterojunction high-performance solar module with SmartWire Connection Technology (SWCTTM). Features Made in Germany. Designed in Switzerland - Production and development according to the highest quality standards Highly profitable - More energy yield over the same area even...

The OutBack MATE is a complete system controller and display for both the OutBack FX2000 inverter/charger and MX60 MPPT PV charge controller. It provides a display of the operation as well as allows control and adjustment of the setpoints. The OutBack Mate also coordinates...

Enphase M215 Microinverters are built on the IQ7 Series platform, allowing for easy replacement and site expansion of 240 VAC solar installations. The DC circuit is isolated and insulated from the ground, so no ground electrode conductor (GEC) is required, simplifying installation, enhancing safety,...

The Philadelphia Solar 540W Phenex Bifacial Solar Panel combines advanced bifacial technology and a robust 144-cell half-cut design to deliver unparalleled energy efficiency and reliability. Designed for high-performance energy generation, this panel is ideal for utility-scale, commercial, and industrial solar installations, maximizing power output even in...

The Lynx Shunt VE.Can is an intelligent 1000A shunt with location for a fuse (not included), the built-in battery monitor accurately monitors the state of charge of your battery. Use a GX device (e.g. Cerbo GX) for reading out the information. Part of the...

Less components and lower cost. Excellent performance under the IEC and UL Standard for 1500V system voltage brings lower system side cost. Excellent PID-resistant performance. Passed more strict PID test with 85% RH, 85 deg C temperature, 1500V. Features Performance - Positive power tolerance...