Victron Energy VE.Bus 5000 VA/4000 W Quattro Inverter/Charger

Similar to the MultiPlus, the Quattro is also a combined inverter and charger. Additionally it can accept two AC inputs and automatically connect to the active source. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology plus multiple system integration features such as three or split phase operation and parallel operation.

Features

• Two AC Inputs & two AC Outputs - The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output
• Unique PowerAssist feature - The Quattro will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery
• Virtually unlimited power thanks to parallel operation - Up to 6 Quattros can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities
• Remote Monitoring and Control - When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Quattro and system or systems' locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Quattro to auto starting a backupgenerator and more
• Two AC inputs with integrated transfer switch - The Quattro can be connected to two independent AC sources, for example the public grid and a generator, or two generators. The Quattro will automatically connect to the active source
• Two AC Outputs - The main output has no-break functionality. The Quattro takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption, The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, like a water heater for example, can be connected to this output
• Split phase and three phase capability - Two units can be configured for split phase, and three units can be configured for three phase output. But that's not all: up to 4 sets of three units can be parallel connected to provide 96W/120kVA inverter power and more than 1600A charging capacity
• PowerControl - Dealing with limited generator, shore side or grid power - A current limit can be set on each AC input. The Quattro will then take account of other AC loads and use whatever is spare for charging, thus preventing the generator or mains supply from being overloaded
• PowerAssist - Boosting shore or generator power - This feature takes the principle of PowerControl to a further dimension allowing the Quattro to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the Quattro will make sure that insufficient mains or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery
• Solar energy: AC power available even during a grid failure - The Quattro can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available
• System configuring - In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure, Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software, Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications)
• On-site Monitoring and control - Several options are available: Battery Monitor, Multi Control Panel, Color Control GX or other GX devices, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232)
• Remote Monitoring and control - Color Control GX or other GX devices. Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge
• Remote configuring - When connected to the Ethernet, systems with a Color Control GX or other GX device can be accessed, and settings can be changed remotely
• Digital Multi Control Panel - A convenient and low cost solution for remote monitoring, with a rotary knob to set PowerControl and PowerAssist levels
• VE.Bus Smart Dongle - Measures battery voltage and temperature and allows monitoring and control of Multis and Quattros with a smartphone or other Bluetooth enabled device
• Computer controlled operation and monitoring Several interfaces are available: Color Control GX and other GX devices Monitoring and control. Locally, and also remotely on the VRM Portal, MK3-USB VE.Bus to USB interface Connects to a USB port, VE.Bus to NMEA 2000 interface Connects the device to a NMEA2000 marine electronics network
• BMV-712 Smart Battery Monitor - Use a smartphone or other Bluetooth enabled device to: customize settings, monitor all important data on single screen, view historical data, and to update the software when new features become available
• VE.Bus communication port - For parallel, split phase and three phase operation, remote monitoring and system integration
  

Specifications

• Width: 328 mm
• Height: 444 mm
• Depth: 240 mm
• Material: Aluminum
• Color: Blue (RAL 5012)
• Continuous Power at 25°C: 5000 VA / 4000 W (Inverter)
• Continuous Power at 40°C: 3700 W (Inverter)
• Continuous Power at 65°C: 3000 W (Inverter)
• Peak Power: 10000 W (Inverter)
• DC Input Voltage Range: 38-66 V (Inverter)
• Output AC Voltage: 120 VAC ±2% (Inverter)
• Output AC Frequency (Adjustable): 60 Hz ±0.1% (Inverter)
• Maximum Efficiency: 95% (Inverter)
• Zero-Load Power: 35 W (Inverter)
• Zero-Load Power in AES Mode: 30 W (Inverter)
• Zero-Load Power in Search Mode: 15 W (Inverter)
• Protection: A-G
• Battery Connection: (4) M8 Bolts (2 Plus & 2 Minus Connections)
• Protection Category: IP21
• Operating Temperature: -40 to 65 °C
• Humidity (Non-Condensing): Maximum 95%
• Remote On/Off: Yes
• AC Input Voltage: 90-140 VAC (Charger)
• AC Input Frequency Rating: 45-65 Hz (Charger)
• Charge Voltage Absorption: 57.6 VDC (Charger)
• Charge Voltage Float: 55.2 VDC (Charger)
• Storage Mode: 52.8 VDC (Charger)
• Charge Current House Battery: 70 A (Charger)
• Battery Temperature Sensor: Yes
• 120 VAC Connection: Bolts M6
• PowerControl/PowerAssist: Yes
• Programmable Relay: 3x
• Auxiliary Output: 50 A
• General Purpose Com Port: 2x
• Maximum Feed Through Current: 2x 100 A
• Standards:
  • EN-IEC 60335-1
  • EN-IEC 60335-2-29
  • EN-IEC 62109-1
  • EN 55014-1
  • EN 55014-2
  • EN-IEC 61000-3-2
  • EN-IEC 61000-3-3
  • IEC 61000-6-1
  • IEC 61000-6-2
  • IEC 61000-6-3
  • TUV
  • ETL Listed
  • PV Cycle
  • MCS
  • IEC
  • UL
• Warranty: 5 Years Limited
• Weight: 66 lb
  

Documents 

• Technical Drawing
• Warranty Information
• Specification Sheet
• Instruction/Installation Manual