Soladeck flashed PV roof-mount combiner/enclosure 600VDC 120 amp

SolaDeck models are flashed, seamless, weather-tight enclosures that are NEMA 3R rated. They provide a flashed roof penetration that connects the outdoor system wiring to the interior house wiring and give consistency in every installation. The 0799-5B Photovoltaic Combiner Enclosure is listed and labeled to UL 1741 standards and can be used to combine or pass-through wiring of both AC and DC circuits. A professional appearance is provided by the 18-gauge galvanized 90 steel and powder-coated finish.

Features

• A slotted cover locks into place with one pre-installed set screw, NO more loose cover screws!
• Lower profile cover allows side and bottom penetration to the sidewalls
• Installed din rail can be used horizontally or vertically depending on your install needs
• Two 3/4 in pre-punched holes at the base of the SolaDeck. Two NEMA 4 plugs come installed, these can be removed to insert your fitting or conduit without needing to drill
• Base and cover stamped from G90 galvanized steel
• 7 in Din rail and 5 position ground block factory installed
• 2/12 - 12/12 Roof slopes
• Limited lifetime warranty
• Seamless draw (stamped) with a 15.75" x 17.25" flashing
  

Specifications

• Type: Roof Mount
• Height: 17-1/4 in
• Width: 15-3/4 in
• Depth: 3.13 in
• Material: 18 Gauge G90 Galvanized Steel
• Finish: Powder Coated Black
• Enclosure Rating/IP Rating: NEMA 4
• Electrical Rating: 600 VDC at 115 A, 240 VAC at 60 A
• Temperature Rating: -35 to 75°C
• Weight: 9.2 lb
• Standards:
  • ETL listed & labeled
  • Conforms to the UL1741 Standard
  • CSA C22.2 No. 290
    

Documents 

• Specification Sheet
• Instruction/Installation Manual
• Drawing Sheet