X
-
IronRidge Contour End Caps (L-R Pair) (Priced as each)
IronRidge set out to design a flashing that checked all the boxes: fully waterproof, fast and easy to install correctly, economical, and strong enough to handle every environmental condition. FlashVue does it all. The optimized flashing design features a large viewport, for easy alignment...- $7.25
- $7.25
- (-0%)
- Prix unitaire
- par
-
IronRidge BX Top Clamp, 33mm, Mill (Priced as each)
Features The top and bottom clamps of the BX System combine to create a multi-directional grip on the module from above and below, ensuring a strong connection regardless of force direction Easy installation, compatible with BX series Specifications Size: 33 mm Standards: CE, ETL...- $1.99
- $1.99
- (-0%)
- Prix unitaire
- par
-
Enphase Energy 260-460 W Microinverter
Our newest IQ8M Microinverters are the industry's first grid-forming microinverters with split-phase power conversion capability to convert DC power to AC power efficiently. The brain of the semiconductor-based microinverter is our proprietary application-specific integrated circuit (ASIC) which enables the microinverter to operate in grid-tied...- $171.99
- $171.99
- (-0%)
- Prix unitaire
- par
-
Enphase Energy 235-350 W Microinverter
Our newest IQ8M Microinverters are the industry's first grid-forming microinverters with split-phase power conversion capability to convert DC power to AC power efficiently. The brain of the semiconductor-based microinverter is our proprietary application-specific integrated circuit (ASIC) which enables the microinverter to operate in grid-tied...- $145.00
- $145.00
- (-0%)
- Prix unitaire
- par
-
Hoymiles Power Electronics HM-400NT Series 400 VA Natural Convection Cooling Microinverter
Hoymiles 1-in-1 microinverter, which can be connected to one panel and used in various applications, is one of the most flexible solar solutions. With a maximum DC voltage of 60 V, Hoymiles microinverter is a PV Rapid Shutdown Equipment and conforms with NEC-2017 and...- $155.00
- $155.00
- (-0%)
- Prix unitaire
- par
-
Hoymiles Power Electronics HM-300NT Series 300 VA Natural Convection Cooling Microinverter
Hoymiles 1-in-1 microinverter, which can be connected to one panel and used in various applications, is one of the most flexible solar solutions. With a maximum DC voltage of 60 V, Hoymiles microinverter is a PV Rapid Shutdown Equipment and conforms with NEC-2017 and...- $144.00
- $144.00
- (-0%)
- Prix unitaire
- par
-
Gstar 370W Bifacial 120 Half-Cut Mono Solar Panel
Gstar 370W Bifacial 120 Half-Cut Mono Solar Panel Maximize your solar energy production with the Gstar 370W Bifacial Solar Panel, designed with 120 half-cut monocrystalline cells for superior efficiency and durability. Utilizing advanced bifacial technology, this panel captures sunlight from both sides, increasing overall power generation. It...- $169.00
- $169.00
- (-0%)
- Prix unitaire
- par
-
Outback DC Shunt Bus for GS Load Center (SKU Part Number GS-SBUS)
This is a shunt bus to connect three shunts within the GS Load Center. It is needed when adding the optional FLEXnet DC and it's additional shunts.. Features Easy installation Specifications Rated Current Rating: 180 A Suitable For Use With: GS Load Center Standards:...- $32.00
- $32.00
- (-0%)
- Prix unitaire
- par
-
Siemens A Series 240 Vac 250 Vdc Non-Fusible General Duty Type VBII Low Voltage Safety Switch
General duty safety switches are intended for applications where reliable performance and continuity of service are needed. But where duty requirements are not severe and usual service conditions prevail. These switches are intended for use primarily with supply circuits rated 240 VAC or less...- $90.99
- $90.99
- (-0%)
- Prix unitaire
- par
-
IronRidge Ground Mount Bonded Rail Connector | 3"
IronRidge's Bonded rail connectors attaches and bonds horizontal 3 in Schedule 40 cross pipes to XR1000 Rails. Each rail requires two connectors to create a secure and bonded attachment. The Rail Connector is manufactured using extruded 6000 series aluminum and is also available in...- $16.99
- $16.99
- (-0%)
- Prix unitaire
- par
-
Victron Galvanic Isolator -VDI-16 (SKU Part Number GDI000016000)
The galvanic isolator prevents electrolytic corrosion. It blocks low voltage DC currents that enter your boat via the shore power earth wire. These currents can cause corrosion to the boat's underwater metals, like the hull, propeller, shaft and so on. The galvanic isolator consists...- $157.00
- $157.00
- (-0%)
- Prix unitaire
- par
-
Outback FW-SP-R Replacement FLEXware Surge Protector
The OutBack Power FLEXware Surge Protector is a seamlessly integrated balance-of-system component for the FX Series Inverter/Charger. The FLEXware Surge Protector was designed by OutBack engineers specifically for OutBack FX Series Inverter/Chargers, and provides multiple levels of protection for the vital electrical components of...- $133.40
- $133.40
- (-0%)
- Prix unitaire
- par
-
Outback 500 Amp 50mV DC current shunt with attached terminal bus bar and one white insulator (SKU Part Number FW-SHUNT500)
500 A 50mV DC current shunt with terminal bus bar and white insulator. Features Provide valuable insight into the status of batteries or DC power source One shunt kit is included standard on FLEXware 500 and FLEXware 1000 DC enclosures Specifications Current Rating: 500...- $84.97
- $84.97
- (-0%)
- Prix unitaire
- par
-
Outback FLEXware Shunt Bus (SKU Part Number FW-SBUS)
Shunt bus allows up to four high current cable connections on same side of DC shunt - includes two 3/8 inch bolts and mounting screws - solid brass rated for 1000 A. Features FLEXware DC bus connectors make code compliant DC connections easier Have...- $35.00
- $35.00
- (-0%)
- Prix unitaire
- par
-
Outback FLEXware MATE3 Mounting Bracket for Standard Electrical Box (SKU Part Number FW-MB3-F)
This kit allows the user to mount the MATE3 controller to a standard electrical box, flat against a wall. This kit requires a standard electrical outlet box to be mounted in the wall behind the MATE3. The FW-MB3-F mounting plate must attach to this...- $38.00
- $38.00
- (-0%)
- Prix unitaire
- par
-
Outback FLEXware MATE3 Mounting Bracket (SKU Part Number FW-MB3)
This kit allows the user to mount the MATE3 controller to the side of the FLEXware assembly. It's designed to fit both the FLEXware 500 AC and the FLEXware 1000 enclosures. All hardware is included for fastening the bracket to the enclosure. Features Kit...- $48.00
- $48.00
- (-0%)
- Prix unitaire
- par
-
Outback FLEXware MATE2 mounting bracket- with mounting screws and bushings (SKU Part Number FW-MB2)
Bracket for mounting a MATE2 system display on the side of FW500 and FW1000 enclosures. Specifications Includes: Mounting Screws & Bushings Application: Mounting a MATE2 System Display on the Side of FW500 and FW1000 Enclosures Documents Specification Sheet Instruction/Installation Manual- $40.91
- $40.91
- (-0%)
- Prix unitaire
- par
-
Outback Power FW-MB1 Mate Mounting Bracket (SKU Part Number FW-MB1)
FLEXware MATE mounting bracket with mounting screws and bushings. Mount a FLEXmax charge controller and MATE system display to FLEXware 500, FLEXware 1000 and Radian enclosures. MATE not included. Features Easy installation and high compatibility Specifications Dimensions: 6 in x 4 in x 2...- $85.99
- $85.99
- (-0%)
- Prix unitaire
- par
-
Outback DC Conduit Adapter (SKU Part Number FW-DCA)
The FLEXware DC Adapter or FW-DCA is a plastic case that fits on the DC end of an FX Series Inverter/Charger to extend the size of the DC wiring compartment in OutBack FLEXware systems. The FW-DCA aligns with knockouts on both the FW500-DC and...- $55.99
- $55.99
- (-0%)
- Prix unitaire
- par
-
Outback Charge Controller Mounting Bracket (SKU Part Number FW-CCB2)
Bracket for mounting a single FM Charge Controller. Includes bracket, bushings and mounting hardware FM-60 or FM-80 Charge Controller Mounting Brackets FW-CCB and FW-CCB2 mounting brackets allow OutBack Power Systems charge controllers to be mounted on the side of FW500-DC or FW1000-DC enclosures. FW-CCB2-T...- $95.00
- $95.00
- (-0%)
- Prix unitaire
- par
