Magnum Energy MS-PAE 4000 W Off-Grid Inverter/Charger

The MS-PAE 120/240V series inverter/charger from Magnum Energy is a pure sine wave inverter designed specifically for the most demanding renewable energy applications. The MS-PAE Series is powerful, easy-to-use, and best of all, cost effective. No series stacking required: The unique design of the MS-PAE Series can provide 120 and 240 volts output in one unit, eliminating the need to stack two units together to get 240 V. Parallel stacking: You can parallel up to four inverter/chargers for up to 17.6 kW of power at 120/240V. MP Panels and Router are required for parallel stacking the MS-PAE Series. Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger - 25-30% less AC current than standard chargers.

Features

• Pure sine wave - Power your TVs, computers and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%
• Choices - The MS-PAE Series comes in 24 and 48 volt configurations, allowing you to choose the model that is right for you
• Versatile mounting - Mount the MS-PAE Series on a shelf or wall
• Lightweight - The lightweight aluminum base and cover also provides noise reduction and corrosion resistance
• Multiple ports - The MS-PAE Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port
• Accessible design - The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be
• Convenient switches - The MS-PAE Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator
  

Specifications

• Type: Off-Grid
• Series/Model: MS-PAE
• Length: 13.75 in
• Width: 12.65 in
• Height: 8 in
• Input Battery Voltage Range: 18-34 VDC (Inverter)
• Nominal AC Output Voltage: 120/240 VAC Split Phase +/-5% (Inverter)
• Output Frequency and Accuracy: 60 Hz +/-0.1 Hz (Inverter)
• 1 ms Surge Current (Amps AC): Line-Neutral: 120, Line-Line: 70 (Inverter)
• 100 ms Surge Current (Amps AC): Line-Neutral: 72, Line-Line: 40 (Inverter)
• 5 sec Surge Power (Real Watts): 5800 W (Inverter)
• 30 sec Surge Power (Real Watts): 5200 W (Inverter)
• 5 min Surge Power (Real Watts): 4800 W (Inverter)
• 30 min Surge Power (Real Watts): 4500 W (Inverter)
• Continuous Power Output at 25 deg C (with 1.0 PF): 4000 VA (L-L) (Inverter)
• Continuous Current Output: 266 ADC (Inverter)
• Inverter Peak Efficiency: 93% (Inverter)
• Transfer Time: 16 ms (Inverter)
• Search Mode (Typical): <6 W (Inverter)
• No-Load (120 VAC Output, Typical): 27 W (Inverter)
• Waveform: Modified Sine Wave (Inverter)
• Continuous Output at 25 deg C: 105 ADC (Charger)
• Charger Efficiency: 85%
• Power Factor: >0.95 (Charger)
• Input Current at Rated Output (AC Amps): 15 AAC Per Leg at 120/240 VAC Split Phase (Charger)
• Transfer Relay Capability: 2 Legs at 30A Per Leg Transfer Standard on all Models
• Five Stage Charging Capability: Bulk, Absorb, Float, Equalize (Requires Remote), and Battery Saver™
• Battery Temperature Compensation: Yes, 15 ft Battery Temperature Sensor Standard
• Internal Cooling: 0-120 Cfm Variable Speed Drive Using Dual 92 mm Brushless DC Fans
• Over Current Protection: Yes, With Two Overlapping Circuits
• Over Temperature Protection: Yes on Transformer, MOSFETS & Battery
• Corrosion Protection: Yes, PCB's Conformal Coated, Powder Coated Chassis/Top, and Stainless Steel Fasteners
• Operating Temperature: -20 to 60 deg C
• Non-Operating Temperature: -40 to 70 deg C
• Relative Humidity: 0-95% Non-Condensing
• Maximum Operating Altitude: 15000 ft
• Mounting Type: Shelf, Wall (No Events on Bottom), MP or MMP Panels
• Standards: ETL Listed to ANSI/UL1741 and CSA STD C22.2 No.107.1-01
• Warranty: 3 Years
• Weight: 55 lb
  

Documents 

• Specification Sheet
• Owners/User Manual